Gateway AD-520, User Manual

Page: 54 / 92

48
Chapter 3: Using the DVD Player
www.gateway.com
Starting play at a bookmark
To start play at a bookmark:
1
While playing a DVD or CD, press B
OOK
M
ARK
on the remote control. The
bookmark menu appears on the television (and not on the display).
2
Use the remote control cursor buttons and to select the Mark mode.
Each time the cursor buttons are pushed, the mode switches from Mark
mode to Recall mode.
3
Use the remote control cursor buttons and to select the bookmark
number you want to recall.
4
Press E
NTER
on the remote control. Playback resumes from the scene or
point corresponding to the selected bookmark.
Changing the audio language
To change the audio language:
■ While playing a DVD, press A
UDIO
on the remote control. The audio
language menu appears on the television. Each time this button is pressed,
the audio language changes to the next language available on the DVD.
Important The information in this section only applies to DVD video
discs with more than one language recorded on them.
Important When the power is turned off and on or the disc is changed,
the language played is the one selected in the settings
menu. For more information, see
“Setup menus and
options” on page 55 . If this language is not available on
the disc, only an available language on the disc is played.