Gateway 9715, User Manual

Page: 95 / 278

90
www.gateway.com
Chapter 4: Installing Components
7
Push the memory board handle down into the locked position.
8
Follow the instructions in “Closing the server case” on page 72 .
To add a memory board while the system is off:
1
Follow the instructions in “Preventing static electricity discharge” on page 65 .
2
Follow the instructions in “Opening the server case” on page 66 .
3
Remove the memory board air baffle from the memory slot you intend to use.
4
Install DIMMs on the new memory board by following the instructions in “Installing
and removing DIMMs” on page 91 .
5
Make sure the handle on the memory board is in the open/up position, then align
the ends of memory board with the card guides at each end and insert the memory
board into the memory board slot.
6
Push the memory board handle down into the locked position.
7
Follow the instructions in “Closing the server case” on page 72 .
8510702.book Page 90 Thursday, July 7, 2005 11:21 AM