Gateway 960, Installation Manual

Page: 12 / 36

8
Installing Your Gateway Server into a Rackmount Cabinet
www.gateway.com
3
Slide the side panel toward the front of the case, then lift the panel away
from the case. Store the side panel in case you need to reinstall it later.
To remove the server feet:
1
Use needle-nose pliers to grip the server foot anchor, pull the anchor
straight out, then remove the server foot.
- OR -
Use a flat-blade screwdriver to pry the server foot anchor up, pull the
anchor straight out, then remove the server foot.
2
Repeat Step 1 for the three remaining server feet.