Gateway 930 series, System Manual

Page: 112 / 160

104
Managing Your System
12
In the right frame, right-click gw930Snmptrap.mxw .
13
On the shortcut menu, select
All Tasks
, then click
Install.
14
If the Command Queue window is open, it displays the policy installation
process.
15
In the Device Selector window, click the
Devices
tab to select the
computer that you want to manage through ManageX. Click
Apply.
16
In the left frame of the ManageX window, click
Gateway 930 Series
Components
.
17
In the right frame, double-click the entry for the server. ManageX displays
the WBEM Object details.
18
Click
Close
.
You can open the Message Reader to view the events. The Message Reader
is dynamically updated every few seconds.
19
In the right frame, double-click an entry to view its properties.
System security
To prevent unauthorized entry or use of the system, a key lock on the bezel
door is provided. This lock not only prevents unauthorized access to the power
switch, but prevents removal of the side cover as well.
Security measures may also be set in the BIOS Setup utility which establish
passwords and automatic system lockouts. The system also includes server
management software that monitors the chassis intrusion switch.
Mechanical lock and monitoring
The system includes an intrusion switch. When the bezel is removed, the
switch transmits an alarm signal to the server, where server management
software processes the signal.
Software locks through the BIOS Setup utility
The Security tab in the BIOS Setup utility (see “About the BIOS Setup utility”
on page 83) provides several security features to prevent unauthorized access
to the system. Once the security measures are enabled, access to the system
is allowed only after you enter the correct password(s). For example, the
security features let you:
8508088.book Page 104 Thursday, November 1, 2001 9:35 AM