Gateway 910 Series, System Manual

Page: 20 / 129

12
System Setup
4
Restart your server. The setup is complete.
Turning off your server
Every time you turn off your server, shut down the operating system first.
You may lose data if you do not follow the proper procedure.
To turn off your server in Windows 2000 Server:
1
Click
Start
, then select
Shut Down,
then
Shut down
.
2
Click
OK
. The operating system shutdowns and the server turns off.
3
Turn off the monitor and peripheral devices.
Important For other operating systems, refer to the appropriate
operating system software manual for setup instructions.
Warning When you turn the server off, some electric current still
flows through the server. Before opening the server case
or connecting or removing any peripherals, turn off the
server, then unplug the power cord and modem cord (if
installed) or you may get an electric shock.
Caution When you routinely turn off your server (daily or weekly),
do not unplug the server or use the On/Off switch on the
power strip. Regularly cutting off all power to your server
may cause premature battery failure.
Important For other operating systems, refer to the appropriate
operating system software manual for instructions.