Gateway 7450R, System Manual

Page: 90 / 124

82
Gateway 7450R Server System Manual
Memory and processor problems
The system detected memory errors during start up
The system does not recognize a new or second processor
Peripheral/Adapter problems
The system does not recognize a SCSI device
Probable cause Solution
Memory was added or
removed, and the new
configuration was not saved
in the BIOS Setup utility Open the BIOS Setup utility and save the new memory
configuration.
The memory was installed
incorrectly Make sure that the memory is properly seated and
oriented.
A memory chip is faulty Replace the card with the faulty chip. Third-party
diagnostic programs can help determine which chip or
memory segment is failing.
Probable cause Solution
The processor was installed
incorrectly Check the installation. Make sure that the processor
is fully seated in its socket. The processor should be
recognized automatically if it was installed correctly.
Probable cause Solution
The device needs to be
added as new hardware From the Control Panel window (Start | Settings | Control
Panel), double-click Add New Hardware. Follow the
on-screen instructions for adding the device.
The SCSI ID may be
invalid Assign an available SCSI ID to the device.
The SCSI chain is not
terminated Make sure the last device on the SCSI chain is terminated.
8507328.book Page 82 Thursday, February 15, 2001 11:28 AM