Gateway 7450R, System Manual

Page: 84 / 124

76
Gateway 7450R Server System Manual
System security
You can also set security measures in the BIOS Setup utility which establishes
passwords and automatic system lockouts. The system also includes server
management software that monitors the chassis intrusion switch.
Mechanical access and monitoring
The system includes a chassis intrusion switch. When the top panel is opened,
the switch transmits a signal to the system board, where server management
software processes the signal.
Security through the BIOS Setup utility
The BIOS Setup utility provides several security features to prevent
unauthorized or accidental access to the system. Once the security measures
are enabled, access to the system is allowed only after you enter the correct
password. For example, the utility lets you:
■
Set and enable the supervisor and user passwords
■
Control access to the Setup utility
■
Restrict diskette drive access
■
Restrict access to the hard drive boot sector
Configure and enable the security features using the BIOS Setup utility.
Disabling the security features does not change the state of system power. That
is, if you press and release the power switch while security is on, the system
will not power off when security is later disabled. However, if the front panel
power switch remains pressed when security is disabled, the system will turn
off.
8507328.book Page 76 Thursday, February 15, 2001 11:28 AM