Gateway 7405GX - Athlon 64 2 GHz Hardware Reference Manual Download

Page: 21 / 68

Using the status indicators

www.gateway.com

Using the status indicators

Important

If none of the indicators are on, you may
need to press

+F1

to toggle the status

indicators on and off.

Status indicators inform you when a drive is being used or when a button has
been pressed that affects how the keyboard is used. The status indicators are
located below the touchpad.

Indicator

Icon

Description

AC power

■

LED on - AC power is connected.

■

LED off - AC power is not connected.

Wireless network
(optional)

■

LED on - Wireless network is turned on.

■

LED off - Wireless network is turned off.

Caps lock

■

LED on - Caps lock is turned on.

■

LED off - Caps lock is turned off.

Num lock

■

LED on - Numeric keypad is turned on.

■

LED off - Numeric keypad is turned off.

Drive

■

LED blinking - The hard drive or DVD drive is in use.

■

LED off - The hard drive or DVD drive is not in use.

Hard drive

AC power

Caps lock

Num lock

Wireless network

Summary of Contents for 7405GX - Athlon 64 2 GHz





































































Search results

Summary of Contents for 7405GX - Athlon 64 2 GHz

Reviews:

Related manuals for 7405GX - Athlon 64 2 GHz

Brands by name

Popular brands

Gateway 7405GX - Athlon 64 2 GHz, Hardware Reference Manual

Search results

Summary of Contents for 7405GX - Athlon 64 2 GHz

Reviews:

Related manuals for 7405GX - Athlon 64 2 GHz

Brands by name

Popular brands