Installing the cable retractor
13
Installing a cable retractor in a non-Gateway
cabinet
To install a cable retractor in a non-Gateway cabinet:
1
Remove the adapter bracket from the cable retractor straight bracket.
2
Position the cable retractor straight bracket on the back vertical mounting
rail, then align the mounting holes on both the cable retractor bracket
and the back vertical mounting rail.
3
Attach the bracket to the back vertical mounting rail using a bar nut and
screws from the accessory kit.
Straight bracket
Adapter bracket
Cable retractor
Back vertical
mounting rail
Straight bracket
Bar nut
8506163.book Page 13 Wednesday, May 10, 2000 11:40 AM
