Gateway 600, Service Manual, Page: 13 / 103

8
Replacing Gateway 600YG2 Components
www.gateway.com
Removing the batteries
Removing the main battery
To remove the main battery:
1
Disconnect the AC adapter and modem and network cables and prepare
the notebook by following the instructions in
“Preparing the notebook”
on page 6 .
2
Disconnect the notebook from the optional port replicator by following
the instructions in
“Disconnecting from the port replicator” on page 7 .
3
Turn the notebook over so the bottom is facing up.
4
Slide the battery release latch.