manualshive.com logo in svg

Gateway 6-Bay mBTX PRO, User Manual

Share
Download
Gateway 6-Bay mBTX PRO User Manual Download Page 172

APPENDIX A: Legal Notices

164

Notices

Copyright © 2007 Gateway, Inc.
All Rights Reserved
7565 Irvine Center Drive
Irvine, CA 92618 USA

All Rights Reserved

This publication is protected by copyright and all rights are reserved. No part of it may be reproduced or transmitted by any means or in any form, without prior consent in writing from 
Gateway.

The information in this manual has been carefully checked and is believed to be accurate. However, changes are made periodically. These changes are incorporated in newer publication 
editions. Gateway may improve and/or change products described in this publication at any time. Due to continuing system improvements, Gateway is not responsible for inaccurate 
information which may appear in this manual. For the latest product updates, consult the Gateway Web site at 

www.gateway.com

. In no event will Gateway be liable for direct, indirect, 

special, exemplary, incidental, or consequential damages resulting from any defect or omission in this manual, even if advised of the possibility of such damages.

In the interest of continued product development, Gateway reserves the right to make improvements in this manual and the products it describes at any time, without notices or obligation.

Trademark acknowledgments

Gateway and the Black-and-White Spot Design are trademarks or registered trademarks of Gateway, Inc. in the U.S. and other countries. Intel, Intel Inside logo, and Pentium are registered 
trademarks and MMX is a trademark of Intel Corporation. Microsoft, MS, MS-DOS, and Windows are trademarks or registered trademarks of Microsoft Corporation. All other product names 
mentioned herein are used for identification purposes only, and may be the trademarks or registered trademarks of their respective companies.

Macrovision statement

If your computer has a DVD-compatible drive and an analog TV Out port, the following paragraph 
applies:

This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation 
and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Corporation, and is intended for home and other limited viewing uses only unless 
otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited.

Summary of Contents for 6-Bay mBTX PRO























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands