Gateway 3200SE, User Manual, Page: 29 / 144

23 www.gateway.com
Starting your computer
To set the voltage selection switch:
■
Use a tool such as an opened paper clip to slide the voltage selection switch to the
correct voltage position.
Starting your computer
To start your computer:
1
Connect the cables to your computer. See the setup poster.
2
Turn on your computer.
3
If you are starting your computer for the first time, follow the on-screen instructions
to set up your computer.
4
Turn on any peripheral devices, such as printers or scanners, and see the
documentation that came with the device for setup instructions.
Voltage selection switch