Gateway 3-Bay mBTX Pro, User Manual

Page: 143 / 184

www.gateway.com
137
Replacing the processor
.
To replace the processor:
1
Remove the side panel by following the instructions in “Removing the side panel” on
page 122 .
2
Remove the bezel by following the instructions in “Removing the front bezel” on page 124 .
3
For more stability, place your computer on its side. To avoid scratching the case, place it
on a towel or other non-abrasive surface.
4
Remove the fan assembly by squeezing it slightly (top to bottom) and pulling it away from
the case.
5
Lift the 5.25-inch component bay from the chassis to remove it.
6
Disconnect the fan cable from the system board.
Tools
You need a Phillips screwdriver to replace the processor.
Caution
Be careful not to pull or damage the hard drive power and data cables when
you remove the metal reinforcing beam/hard drive assembly.