GatesAir Intraplex DS-64NC, Installation And Operation Manual

Page: 35 / 68

GatesAir 3-1
Intraplex Products
Section 3 – Installation & Configuration
Power supply and time slot considerations may affect installing this module into an existing
multiplexer shelf. Your multiplexer installation and operation manual gives more information,
specifically the sections on channel module configuration guidelines and adding channel modules to
existing systems.
3.1 Inspection
After receiving your Intraplex DS-64NC module and corresponding module adapter, complete these
tasks:
1.
Inspect all shipping containers for damage. If you observe damage, notify the shipping service as
soon as possible.
2. Unpack all equipment from containers.
3. Inspect equipment for damage.
4. Verify that these items are included as expected, confirming each item from the packing list (Bill
of Materials):
•
DS-64NC module
• Whichever one of these module adapters you ordered:
◦ MA-412
◦ MA-412A
◦ MA-413
◦ MA-413A
◦ MA-414
◦ MA-415
◦ MA-420
◦ MA-421
◦ MA-427
◦ MA-428
Note: Verify that the module adapter shipped is the correct one for your needs before installing the
DS-64NC module.
If you have questions regarding possible equipment damage or shipping errors, contact Customer
Service:
●
U.S., Canada, and Latin America: +1-217-222-8200 or●
Europe, Middle East, and Africa: +1-217-222-8200 ●
Asia and Pacific Rim: +1-217-222-82003.2 Preliminary Configuration
To configure the DS-64NC module before installing it in your Intraplex multiplexer, perform these
steps:
1.
Select any unused physical slot of the Intraplex multiplexer in which to install this module.
2. Install the appropriate module adapter at the rear of the slot where you intend to mount this
module. Appendix A gives information on selecting and installing module adapters.
Warning! Assure the power is off before installing a module adapter. Do not hot insert module
adapters.