Y58
User Manual & Install Guide
45 of 148
4.8
Step 8: Setting Up Recording
The Y58 is a hybrid DVR. It has the capability of having a combination of 6 Analog; Analog HD, and 2 IP
camera connected at the same time.
This next step is a crucial step, where you will select which cameras to record video from, and also set
up the quality and resolution of the recorded video.
Navigate to:
Main Menu Setup Surveillance Record
Please review and adjust the following default settings to match your actual camera configuration. For
a detailed explanation of each setting, please see
General
System
DEFAULT SETTINGS:
NTSC
Overwrite
DEFAULT SETTINGS:
By Capacity
Storage Alert
DEFAULT SETTINGS:
(Disabled/Not Applicable)
Pre-Recording
DEFAULT SETTINGS:
Checkbox
–
Unselected
Main Stream
Channel
DEFAULT SETTINGS:
1
Channel Name
The device comes pre-configured with
standard names for the camera channels. You
may change these names if desired to give each
channel an easily remembered and/or location-
specific name.
Maximum of:
8 characters
DEFAULT SETTINGS:
Channel 1
–
set name as
–
CH1
Channel 2
–
set name as
–
CH2
Channel 3
–
set name as
–
CH3
Channel 4
–
set name as
–
CH4
Channel 5
–
set name as
–
CH5
Channel 6
–
set name as
–
CH6
Channel 7
–
set name as
–
CH7
Channel 8
–
set name as
–
CH8
