Y58
User Manual & Install Guide
40 of 148
Figure 4-2 Setup Menu System for Device Configuration
For the basic setup process, we will just need to verify and/or configure the settings in the subsections
highlighted with the red dotted lines in the diagram, as follows:
Under the Basic section:
Regist Info
Time Setup
Startup
User Setup
Network
Application
Other setup
Under the Surveillance section:
Live View
Record
IPC Setup
4.4
Step 4: Setting the Date and Time
The first step is to ensure that the date and time are set correctly in the device.
Navigate to:
Main Menu Setup Basic Setup Time Setup
Please verify that the following default settings are correctly configured. For a detailed explanation of
each setting, please see
General
Date Format
DEFAULT SETTINGS:
MONTH/DAY/YEAR
Time Format
DEFAULT SETTINGS:
24 Hours
Time Zone
If this is not your time zone, please change this
setting as appropriate to the actual time zone
that your fleet will be operating in.
DEFAULT SETTINGS:
(GMT-08:00) PACIFIC TIME (US &
CANADA)
Time Sync
Date/Time
Please verify the time and date.
If the time and/or date is not correct, please
change them to the correct values.
