Gatekeeper Systems G4-304SD1a User Manual & Installation Manual Download

Page: 139 / 151

G4-304SD1a

User Manual & Install Guide

139 of 151

7.5

Upgrading Device Firmware

Periodically Gatekeeper Systems may release new firmware updates for your device which will improve

performance and reliability.

In order to update your device, please download the correct firmware update compatible with your

device. If you have any doubts, please contact Gatekeeper Systems for assistance.

Once you have obtained the appropriate firmware update file, copy this file to a USB flash drive.

Please Note:

If you are using the Finger Mouse/LCD combination to navigate you will need to use a

Gatekeeper Systems USB Hub to allow two devices to share the one USB port. Please follow the

insertion process noted on the Gatekeeper Systems USB hub.

Then

Navigate to:

Main Menu



Setup



Maintenance



Upgrade

Figure 7-4 Upgrading Device Firmware

Click the appropriate

( Upgrade )

button next to the component that you wish to update. Browse to

the folder on your USB flash drive and select the correct firmware update file to apply.

The device will update the firmware accordingly and reboot.

Please ensure that you have the correct Gatekeeper Systems authorised firmware update.

Installing third-party, wrong, or otherwise unauthorised updates will void your warranty and

may cause permanent damage to your device.

Summary of Contents for G4-304SD1a
























































































































































Search results

Summary of Contents for G4-304SD1a

Reviews:

Related manuals for G4-304SD1a

Brands by name

Popular brands

Gatekeeper Systems G4-304SD1a, User Manual & Installation Manual

Search results

Summary of Contents for G4-304SD1a

Reviews:

Related manuals for G4-304SD1a

Brands by name

Popular brands