NanoAAB
User Guide
- 4 -
I. Overview
NanoAAB is the latest, 3rd generation MOSFET with active brake.
The application
of most up-to-date transistors and microprocessor enabled us to create the smallest
and most reliable MOSFET in the market. Thanks to its special coating, it is resistant to
atmospheric conditions.
Key functions:
MOSFET
Do you want to achieve a higher rate of fire and faster trigger
response? Are you planning a power upgrade of your rifle? In that
case, you need a MOSFET.
It targets the energy from the battery directly to the motor, bypassing
the mechanical trigger contacts. As a result, you will gain higher rate
of fire of the rifle and a faster trigger response, and the contacts will
be protected against burn out.
Active Brake
Do you care about realism? Would you like to increase the life of the
gearbox? Does your rifle have such high rate of fire that you are not
able to make a single shot? Active brake will sort things out.
In SEMI Mode, the brake will not allow for compressing the piston
after a shot. The piston will stop in front position which eliminates
unnecessary stresses, increasing the service life of Gearbox and its
parts. It is very important, especially with an AEG power upgrade.
After releasing the trigger, the rifle immediately stops shooting. Thus,
you will gain more realism and, additionally, won’t lose your precious
ammunition.
Electronic Fuse
A new MOSFET will never let you down on the battlefield. It is totally
protected against overheating and short-circuits of the electrical
system. In case of the rifle becoming jammed, it will protect the motor
and the battery against any damage.
