Gastroback Design Automatic Bread Maker Advanced, Operating Instructions Manual, Page: 9 / 66

9
Cleaning”).
• Always unplug the appliance, and wait until the motor comes to a
standstill, before assembling or disassembling any parts (e.g. bread
pan). Additionally leave the appliance cool down, before moving, or
cleaning the appliance. Always unplug the appliance, when not in
use. Always hold the housing at both sides near the bottom for moving
the appliance. Do not hold the appliance at the lid, lid handle, bread
pan handle, or power cord for moving the appliance. Do not place
any hard and/or heavy foreign objects on or in the appliance or any
part of it.
• Do not use any corrosive chemicals, abrasive cleaners, or cleaning
pads (e.g. bleach, oven cleaner, metal scouring pads) for cleaning to
avoid damage to the surfaces.
•
Do not place the appliance, or any part of it, or power cord in an
automatic dishwasher.
• Do not leave any food dry on the appliance. Always clean the appli-
ance after each use to prevent accumulation of baked-on foods (see
“Care and Cleaning”). Always keep the appliance and its parts,
where it is clean.
IMPORTANT SAFEGUARDS FOR ELECTRICAL APPLIANCES
The appliance is heated electrically. Place the appliance near a suitable
wall power socket to connect the appliance directly to a protected mains
power supply with protective conductor (earth/ground) connected proper-
ly. Ensure that the voltage rating of your mains power supply corresponds
to the voltage requirements of the appliance (220 -240 V, 50/60 Hz,
AC, rated for at least 10 A) to avoid interference with other appliances.
The installation of a residual current operated circuit breaker (r.c.c.b.)
with a maximum rated residual operating current of 30 mA in the supp-
lying electrical circuit is strongly recommended. If in doubt, contact your
electrician for further information.
In various foreign countries, the specifications for power supplies are sub-
ject to incompatible norms. Therefore it is possible that power supplies in
foreign countries do not meet the requirements for safe operation of the
appliance. Thus, before operating the appliance abroad, ensure that safe