D-Guard² Instruction Manual
Item Number 201018
57
28 Maintenance
Make sure the D-Guard² is calibrated regularly. Gastech recommends at least every
six months.
28.1 Calibration Interval
The D-Guard² must be included in your sites regular maintenance program.
28.2 Cleaning
Inspect the inside of the D-Guard² for moisture ingress. Replace the main
seal as required.
28.3 Visual Inspection
Figure 37. Splash Guard.
Make sure all fastenings and cable glands are secure.
Remove the Splash Guard from the D-Guard².
Step 1.
Use a brush to remove debris and then wash in potable water. Make sure
the Splash Guard is dry before use.
Step 2.
Wipe the outside of the D-Guard² with a cloth dampened with potable water
only. Do not use solvents.
Step 3.
Refit the Splash Guard.
Step 4.
Step 1.
Step 2.
