D-Guard² Instruction Manual
Item Number 201018
43
Step 3
. Use to go into the system tests.
Step 5
. Use to change or to cancel.
21.3 4-20mA Output Test
You can test the D-Guard² 4-20mA current loop output.
Access the Advanced Settings menu. See
Step 1
. Use to go into the advanced menu.
Step 2
. Use to highlight system tests.
Step 4
. Use to go into the 4-20mA test.
CAUTION: You must check external equipment before the output is tested. Failure to do so
may trigger external control systems.
