GasTech D-Guard2, Instruction Manual, Page: 26 / 59

D-Guard² Instruction Manual
Item Number 201018 26
Step 1 . Use to go into the full scale menu. Step 2 . Use to adjust then to save.
Figure 14. Sensor Gain Warning.
18.2 Set Detector Full Scale
NOTE: The full scale reading cannot be greater than the range of the fitted sensor.
Step 4 . Use to go back or continue. Step 3 . Use to return to the settings menu.
Access the Sensor Settings Menu. See section 18.1 .
CAUTION: You must adjust the sensor gain if the maximum measurable signal error occurs.