Gast DOA-P704 Operation & Maintenance Manual Download Page 1

LABORATORY OILLESS DIAPHRAGM

VACUUM PUMP & COMPRESSOR

O

PERATION

& M

AINTENANCE

M

ANUAL

Product Use Criteria:

• Pump only clean, dry air.
• Operate at 32ºF - 104ºF (0ºC - 40ºC).
• Protect unit from dirt & moisture.
• Do not pump flammable or explosive gases or

use in an atmosphere that contains such gases.

• Protect all surrounding items from exhaust air.  This

exhaust air can become very hot.

• Corrosive gases and particulate material will

damage unit.  Water vapor, oil-based contaminants
or other liquids must be filtered out.

• Consult your Gast Distributor/Representative

before using at high altitudes.

• This pump is oil-less and requires NO lubrication.
• Laboratory units may be used for both pressure and vacuum.

Thank you for purchasing this Gast product.  It is manufactured to the highest standards

using quality materials.  Please follow all recommended maintenance, operational

and safety instructions and you will receive years of trouble free service.

www.gastmfg.com

ISO 9001 & 14001 CERTIFIED

®Registered Trademark/™Trademark of Gast Manufacturing Inc., Copyright © 2002 Gast Manufacturing Inc.  All Rights Reserved.

PART NO. 70 - 5105 G471PL (Rev B)

Model DOA-P704 Shown

1

WARNING

PLEASE READ THIS MANUAL COMPLETELY BEFORE INSTALLING AND USING

   THIS PRODUCT.  SAVE THIS MANUAL FOR FUTURE REFERENCE AND 

KEEP IN THE VICINITY OF THE PRODUCT.

Summary of Contents for DOA-P704









Reviews: