background image

74R & 75R SERIES

ROCKING PISTON OIL-LESS PUMPS

O

PERATION

& M

AINTENANCE

M

ANUAL

Product Use Criteria:

• Pump only clean, dry air.
• Operate at 32

º

F - 104

º

F (0

º

C - 40

º

C).

• Protect unit from dirt & moisture.
• Do not pump flammable or explosive gases or

use in an atmosphere that contains such gases.

• Protect all surrounding items from exhaust air. This

exhaust air can become very hot.

• Corrosive gases and particulate material will

damage unit. Water vapor, oil-based contaminants
or other liquids must be filtered out.

• Consult your Gast Distributor/Representative

before using at high altitudes.

• This pump is oil-less and requires NO lubrication.  

IMPORTANT:  PLEASE READ THIS MANUAL AND SAVE FOR FUTURE REFERENCE.

Thank you for purchasing this Gast product.  It is manufactured to the highest standards

using quality materials.  Please follow all recommended maintenance, operational

and safety instructions and you will receive years of trouble free service.

www.gastmfg.com

ISO 9001 & 14001 CERTIFIED

®Registered Trademark/™Trademark of Gast Manufacturing Inc., Copyright © 2002 Gast Manufacturing Inc.  All Rights Reserved.

PART NO. 70 - 6850 G496PL  (REV-D) 

Model 74R Shown

Model 75R6 Shown

Summary of Contents for 74R









Reviews: