3
• Use outdoors only.
• Keep children away at all times.
• CAUTION: Accessible parts may be very hot.
Please take care when handling or moving the
appliance.
• Appliance is to be used on a stable, level, flat,
non-flammable surface. The appliance should
be protected from direct drafts and in a well
ventilated place.
• Only cooking vessels with a minimum diameter
of 200mm and a maximum of 300mm are
to be used with this appliance.
• This appliance shall only be used in an above
ground open air situation with natural
ventilation, without stagnant areas, where
gas leakage and products of combustion
are rapidly dispersed by wind and natural
convection.
• Take care that the primary air intakes, located
on the burner tube of this appliance are not
obstructed, or that air flow is restricted by
placing items or other appliances close to or
adjacent to the inlets.
• If there is a leak on your appliance (smell of
gas), immediately attempt to turn off the
cylinder valve. Remove the appliance to a well-
ventilated location away from any ignition
source. Check for leaks using soapy water. Do
not try to detect leaks using a flame.
• Do not attempt to move or relocate the
appliance when it is operating, extinguish
the burner and allow to cool, disengage the
gas cylinder then move the appliance.
IMPORTANT
CHECKING FOR GAS LEAKS
• Check that all connections are tight and that
the gas cylinder connection has been tightened
before you turn the cylinder gas valve on.
• NEVER check for leaks with a flame or pilot
light.
• Using Gas Leak Detection Spray or soapy
water, coat all connections, if bubbles appear
turn the cylinder gas control off and retighten
the connection before re-testing.
• Inspect the appliance regularly for signs of
wear, leaks or incorrect operation.
If symptoms such as flaring of the burner, issues
with lighting, damages to hoses or connections
or leaks from seals or gas controls are identified
do not attempt to repair, return to your authorised
stockist for service and maintenance.
CHANGING GAS CYLINDER
• To check if gas remains in the cylinder,
disconnect from the appliance and hold the
cylinder in a vertical position then shake from
side to side, if there is a sound or feel of liquid
movement inside, the cylinder contains gas.
• When changing gas cylinders ensure this is
conducted outside in a well- ventilated location
free from people, animals and ignition sources
such as naked flames, pilot lights and electrical
equipment with heaters or elements.
