N
2
-Generator
– User Manual
25 / 31
8 Workflow: Installation of N
2
-Generator
INFORMATION!
Please note that the N2-Generator should be switched on minimum
48 hours before it is connected to the device. This due to the
necessary self cleaning of the integrated pressure swing (PSA)
technology that needs to get rid off the oxigen that typically gets into
the gas ways and needs to fully flushed out after a transport or a
longer time of the device when being switched off.
1
Place the N
2
-Generator on
a robust table.
2
Connect the
power plug
(1)
Remove
the
red cap
from
the mounted moisture trap
(2)
