GC-IMS
– User Manual
50/214
6.2 Spectra Window
6.2.1 Overview
After the device is switched on and the system start is completed the Spectra
Window is displayed. In the Spectra Window the data acquisition can be controlled.
The current spectrum is displayed. The Recording Mode can be activated. The
selected measurement program can be started.
Figure 22: Operating Interface - Spectra Window
Program Start Button
By selecting this button the displayed
program is started.
Switching Valve Button
The 6-port-valve can be toggled manually
between
Fill Loop
and
Inject Position
.
The
basic setting
must be set to
Fill
Loop.
Summary of Contents for GC-IMS
