GAS GC-IMS-SILOX User Manual Download Page 6

Page: 6 / 145

Preface

1.1

Symbols Used in this User Manual

Symbol

Description

Danger

This symbol marks paragraphs that describe situations that
can potentially damage the device.

Danger

–

Radioactive Radiation

This symbol marks paragraphs that describe potential
dangers and damage due to exposure to radioactive
radiation.

Danger

–

Explosive Substances

This symbol marks paragraphs that describe potential
dangers and damage due to explosions.

Danger

–

High Voltage

This symbol marks paragraphs that describe potential
dangers to life and health due to electric current.

Danger - Hot Surface

This  symbol  marks  paragraphs  that  describe  situations  in
which  surface  parts  of  the  device  can  heat  up  to  a  point
where  touching  it  or  bringing  objects  close  to  it  may  be
hazardous.

Important

This symbol marks paragraphs that describe important
instructions or information that may prevent the operator
from making common mistakes.

Summary of Contents for GC-IMS-SILOX


















































































































































Search results

Summary of Contents for GC-IMS-SILOX

Reviews:

Brands by name

Popular brands

GAS GC-IMS-SILOX, User Manual

Search results

Summary of Contents for GC-IMS-SILOX

Reviews:

Brands by name

Popular brands