GAS GC-IMS-SILOX User Manual Download Page 12

Page: 12 / 145

Persons under the influence of drugs or alcohol must not operate the device.

Any changes to the equipment, which may endanger the operators must be

reported immediately to the operators and any person handling it.

2.3

Ionization Source

The device contains a Tritium radioactive ionization source of 300 MBq (Below

exemption limit according to EURATOM Directive 96/26).

Do not open the device! Do not try to repair any internal malfunctions

of the device! Internal malfunction recovery, repairs and any

maintenance work may only be carried out by G.A.S. or by personnel

authorized by G.A.S.

2.4

Explosion Protection

The device is not certified for deployment in areas with explosive gas/air

mixtures or other explosive substances.

Do not deploy the device in areas exposed to explosive substances or

mixtures.

Summary of Contents for GC-IMS-SILOX


















































































































































Search results

Summary of Contents for GC-IMS-SILOX

Reviews:

Related manuals for GC-IMS-SILOX

Brands by name

Popular brands

GAS GC-IMS-SILOX, User Manual

Search results

Summary of Contents for GC-IMS-SILOX

Reviews:

Related manuals for GC-IMS-SILOX

Brands by name

Popular brands