BreathSpec®
– User Manual
23/242
2 Safety
2.1 Intended Use Only
WARNING!
Usage other than described in this manual may damage the device
and/or harm persons involved.
Do not use the device for other purposes. Damages due to misuse
are not covered by the guarantee. Such damage claims will be
rejected.
The device and its equipment are not certified for the employment in
areas with explosive gas air mixtures.
All claims or requirements of any kind against the manufacturer and/or its authorized
persons that arise due to damages from a not intended use of the device will be
rejected. All damages that arise from a not intended use are of the operator’s
responsibility.
The intended use of the equipment and its correct handling according are described
in the operating instructions of this manual. Other parts than the parts belonging to
the scope of supply, may only be used after G.A.S. approval.
2.2 Responsibility of Operator
The device may only be operated in a perfect technical condition. Before putting the
device into operation, the condition of the device and its equipment must be checked.
The information and instructions provided in this manual must be followed at any
time.
Besides the instructions provided in this manual the local rules for the prevention of
accidents, general safety regulations - valid for the area of application of the device -
as well as the valid environmental-protection regulations must be considered and
respected.
The responsible technicians and operators must make sure a failure-free use of the
device. Responsibilities among the involved persons regarding installation, operation,
maintenance, and cleaning must be made clear.
The device can be used to analyze human breath. A hygienic operation must be
ensured at all times. Ensure that human breath analysis does not conflict with local
Summary of Contents for BreathSpec
