Workshop manual
-56-
maintenance of the frame
5. Top suspension clamp
6. headlight holder
7. Bottom suspension clamp
- Remove the front wheel (see p. 53).
- Remove the front headlight holder, bridge and front mudguard.
- loosen the top and bottom clamp fixing screws.
- Remove the fork tube by pulling downwards.
MAINTENANCE OF THE FORK
Dust covers
- The table below shows the cleaning intervals for the fork dust covers.
Failure to regularly clean the dust covers will result in dirt entering the
fork. This dirt can compromise the smoothness of the fork and cause
serious oil losses from the joints.
lift the edge of the dust cover and remove it from the seating of the outer tube.
5
7
6
Intervals
Description of the
operation
after every three races
with the presence of dirt
after every race with the
presence of mud
cleaning the fork dust
covers
√
√
Summary of Contents for TXT 2018 Series
