GAS GAS SM 700 2023, Owner'S Manual

Page: 53 / 128

SERVICE WORK ON THE CHASSIS 11
51
11.14 Storing the tool set
Preparatory work
–
Open the fuel tank filler cap. ( p. 19)
–
Remove the seat. ( p. 49)
V02730-10
Main work
–
Remove screws
1
.
Info
A tool for removing and mounting these screws is located in
holder
A
on the underside of the seat.
–
Take off the left side cover.
V02761-10
–
Open the tool set compartment and store tool set
2
.
–
Close the tool set compartment.
–
Position the left side cover.
–
Mount and tighten screws
1
.
Guideline
Screw, radiator shield M6x20 4.5 Nm (3.32 lbf ft)
–
Make sure the tool is reinserted in holder
A
.
Finishing work
–
Mount the seat. ( p. 50)
11.15 Take off the side cover
Preparatory work
–
Open the fuel tank filler cap. ( p. 19)
–
Remove the seat. ( p. 49)