GAS GAS MC 450F 2021, Owner'S Manual

Page: 50 / 142

11 SERVICE WORK ON THE CHASSIS
48
A00885-11
–
Position the brake caliper. Mount and tighten screws
4
.
Guideline
Screw, front
brake caliper M8 25 Nm (18.4 lbf ft)
Loctite ® 243™
–
Position the brake line and the clamp. Mount and tighten
screws
5
.
Guideline
Screw, brake line
bracket EJOT 1.7 Nm (1.25 lbf ft)
Finishing work
–
Install the front wheel. ( p. 88)
11.9 Removing the lower triple clamp
Preparatory work
–
Raise the motorcycle with a lift stand. ( p. 44)
–
Remove the front wheel. ( p. 87)
–
Remove the fork legs. ( p. 46)
–
Remove the start number plate. ( p. 52)
–
Remove front fender. ( p. 53)
–
Remove the handlebar cushion.
A00801-10
Main work
–
Open cable holder
1
on the left and detach the wiring harness.
–
Remove screw
2
.
–
Remove screw
3
.
–
Take off the upper triple clamp with the handlebar and set aside.
Info
Cover the components to protect them against damage.
Do not kink the cables and lines.
A00800-10
–
Remove O-ring
4
.
–
Remove protective ring
5
.
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.