GAS GAS F0103TG, Owner'S Manual

Page: 80 / 121

13 WHEELS, TIRES
78
E01388-10
–
Make sure that eccentrics
3
are fitted correctly to the screws of
link fork
6
.
–
Adjust the chain tension. ( p. 56)
–
Tighten screw
4
.
Guideline
Screw, rear wheel spin-
dle M10 50 Nm (36.9 lbf ft)
Finishing work
–
Remove the motorcycle from the lift stand. ( p. 38)
13.5 Checking the tire condition
Info
Only mount tires approved and/or recommended by GASGAS Motorcycles.
Other tires could have a negative effect on handling characteristics.
The type, condition, and pressure of the tires all have a major impact on the handling characteristic of the motorcy-
cle.
The tires mounted on the front and rear wheels must have a similar profile.
Worn tires have a negative effect on handling characteristics, especially on wet surfaces.
400602-10
–
Check the front and rear tires for cuts, embedded objects, and other
damage.
» If the tires have cuts, run-in objects, or other damage:
–
Change the tires.
–
Check tread depth.
Info
Adhere to the legally required minimum tread depth.
Minimum tread depth
≥
2 mm (
≥
0.08 in)
» If the tread depth is less than the minimum tread depth:
–
Change the tires.