11 SERVICE WORK ON THE CHASSIS
54
I01023-10
–
Position the foot brake cylinder.
Push rod
3
engages in the foot brake cylinder.
The dust boot is correctly positioned.
–
Mount and tighten screws
4
.
Guideline
Remaining screws,
chassis
M6
10 Nm (7.4 lbf ft)
V01711-10
–
Position the angle lever and linkage lever.
–
Mount and tighten fitting
5
.
Guideline
Nut, linkage lever on
angle lever
M14x1.5
60 Nm (44.3 lbf ft)
Info
Pay attention to flat area
B
.
–
Mount and tighten screw
6
.
Guideline
Screw, bottom
shock absorber
M10
60 Nm (44.3 lbf ft)
Loctite
®
2701™
Info
Raise the link fork slightly to be able to mount the screw
more easily.
E02000-11
–
Position the left frame protector.
–
Position the right frame protector.
–
Mount and tighten screws
7
with the washers.
Guideline
Screw, frame protector M5
3 Nm (2.2 lbf ft)
–
Mount the new cable ties.
Finishing work
–
Remove the motorcycle from the lift stand. (
11.20
Removing the seat
E01989-10
–
Remove screw
1
.
