GAS GAS EC FSE 450, Service Manual, Page: 32 / 71

(A). Brake pedal.
(B). 10 mm of play.
(C). Adjustment bolt.
(D). Lock nut.
WARNING
If the brake lever or pedal feels mushy when it is applied, there might
be air in the brake lines or the brake may be defective. Since it is
dangerous to operate the motorcycle under such conditions, check
the brakes immediately.
Brake fluid
Regularly check the brake fluid and periodically change it. It should
also be changed if it is contaminated by water or dirt.
-
30
-
(A)
(B)
(C)
(D)
Front brake lever
Adjust brake lever to a comfortable position. To adjust, loosen the
nut under the rubber protection
(B) . Tighten after adjustment. Ensure
that the brake responds correctly.
(A). Brake lever.
(B). Rubber protection.
Rear brake pedal
When the brake pedal is in rest position, there should be a play of
10 mm. If not, then adjust this.
Ensure that the brake responds correctly and does not rub.
To adjust the pedal play, loosen the locknut, rotate the bolt and
retighten the locknut.
(B)
(A)