GAS GAS EC 2T 20012501300cc RACING, Owner'S Manual

Page: 100 / 107

Owner’s manual
-100-
Troubleshooting
Clutch slips. Excessive clutch fluid level. Verify the clutch fluid level and adjust.
Worn clutch friction plate. Go to your GAS GAS official service.
Broken or weak clutch springs. Go to your GAS GAS official service.
The motorcycle is unstable. Cable interfereswith handlebar turns. Move the cable.
Steering stem locknut too tight. Adjust steering stem locknut.
Damaged or worn steering bearings. Go to your GAS GAS official service.
Bent steering stem. Go to your GAS GAS official service.
Suspension is too hard. Excessive front fork oil level. Pour excess oil.
Front fork oil viscosity too high. Drain fork oil and fill with correct fork oil.
Bent front fork. Go to your GAS GAS official service.
Tire air pressure too high. Verify tire pressure.
Incorrect suspension setings. Adjust suspension.
Suspension is too soft. Insufficient front fork oil level. Fill with oil until the correct level is reached.
Front fork oil viscosity too low. Drain fork oil and fill with correct fork oil.
Tire air pressure too low. Verify tire pressure.
Incorrect suspension setings. Adjust suspension.
Abnormal motorcycle noises. Incorrect chain adjustment. Adjust chain tension.
Worn chain. Replace chain, front and rear sprockets.
Worn rear sprocket teeth. Replace rear sprocket.
Insufficient chain lubrication. Lubricate with appropiate chain oil.
Incorrect rear wheel alignment. Verify wheel spokes tension. Adjust if necessary.
Weak or broken front fork spring. Replace front fork spring.
Worn brake disc. Replace brake disc.
Incorrectly installed brake pads o surface glazed. Reinstall o replace brake pads.
Damaged cylinder. Go to your GAS GAS official service.
Improperly tightened brackets, nuts and bolts. Verify and adjust to correct torque values.
Handlebar vibration Worn tire. Replace tire.
Worn swingarm or its needle bearings. Go to your GAS GAS official service.
Wheel rim off-centered. Go to your GAS GAS official service.
Incorrect wheel alignment Verify wheel spokes tension. Adjust if necessary.
Excessive steering axle tolerances Verify steering head adjustment.
Loose handlebar bracket or loose steering stem
locknut.
Verify and adjust the steering bracket or steering
stem locknut torque to correct values.
Motorcycle pulls to one side. Bent chassis Go to your GAS GAS official service.
Incorrect steering adjustment. Verify the steering head adjustment.
Bent steering stem. Go to your GAS GAS official service.
Bent front fork. Go to your GAS GAS official service.
Incorrect wheel alignment Verify wheel spokes tension. Adjust if necessary.