CONTROLS 6
15
6.5
Stop button (EC 300 US)
S04408-10
The stop button
1
is fitted on the left side of the handlebar.
Possible states
• The stop button
is in the basic position
–
In this position, the
ignition circuit is closed and the engine can be started.
• Stop button
pressed
–
In this position, the ignition circuit is inter-
rupted, a running engine stops, and a non-running engine will not
start.
6.6
Horn button (All EU models)
S04407-12
Horn button
1
is fitted on the left side of the handlebar.
Possible states
• The horn button is in the basic position
• The horn button is pressed
–
The horn is operated in this position.
6.7
Light switch (All EU models)
S04407-11
Light switch
1
is fitted on the left side of the handlebar.
Possible states
Low beam on
–
Light switch is in the central position. In
this position, the low beam and tail light are switched on.
High beam on
–
Light switch is turned to the left. In this
position, the high beam and the tail light are switched on.
6.8
Light switch (EC 300 US)
S04409-10
The light switch
1
is located to the left of the combination instrument.
Possible states
• Light off
–
Light switch is pressed in up to the stop. In this position,
the light is switched off.
• Light on
–
Light switch is pulled out to the stop. In this position, the
low beam and tail light are switched on.
