UAV Hardware Tracker | User’s Manual
such as transmitter antennas or GPS
antennas.
2
Before sticking the velcro strip, ensure that the target
surface is clean and free of any dust, debris or loose
parts. Clean the surface with an alcohol pad if
necessary to remove any oil or grease.
Identify the exact position where the mount base will
be positioned, taking care to ensure that the mount
orientation is correct.
3
Verify that the tracker does not obstruct or impede in
any way the moving parts of the UAV while in
operation, including propellers and any other rotating
propulsion components.
Verify that you can easily remove the battery,
propellers and any other user-swappable parts of the
UAV without having to remove the tracker mount.
4
A velcro strip has been pre-applied to the base of the
tracker mount.
Place the mount onto the UAV at its chosen location.
Apply firm pressure onto the mount to ensure both
velcro strips on the tracker mount and drone surface
are fully secured.
5
To verify that the mount is secure, give the UAV a
gentle shake and turn it upside down.
The mount should remain securely fastened to the
UAV.
6
Suggested mounting points for a number of popular
UAV models can be found in the Appendix of this
document.
Step 4: Mounting the Tracker
GARUDA ROBOTICS PAGE 17 / 36
