◆
To unlock the lock
Using Keypad: Enter a valid user code and press and then hear 1 beep and lights green.
Using Remote: Press remote button. You will hear 1 beep and see a green light.
Keyless Entry Deadbolt Lock with Remote Controls
Operating Instructions
“C” button used
to clear entries
Padlock button used to
activate lock and
during programming
•
IMPORTANT: The lock comes factory preset with
a programming code (123456)
and a user code (123).
Please change the programming
code and user code as soon as
possible after installation to
ensure security.
See below for instructions.
* Note: 1. Code numbers can be any combination of
2-8 digits.
2. When pressing the remote control
button or button it must be directed
towards the outside of sensor plate.
Imported by Trileaf Distribution Trifeuil Toronto, Canada M4S 2B8
◆
To lock the lock
Using Keypad: Press and then hear 2 beeps and lights red.
Using Remote: Press remote button. You will hear 2 beeps and see a red light.
◆
Add a new user code
(You can add up to 10 new user codes)
Re-enter New
New
◆
Delete one existing or preset user code
Re-enter Existing
Existing
◆
Delete all user codes
Re-enter
◆
Create a temporary code
Re-enter New
Re-enter Existing
◆
Change current or preset programming code
Re-enter New
◆
Add a new remote controller
(You can add up to 10 new remote controllers)
beeps and lights green. To add new remote, press remote button.
◆
Delete all remote controllers
Re-enter
◆
Set or cancel auto lock
Set auto lock:
Cancel auto lock:
◆
Programming code reset
Disconnect the battery. Reconnect the battery and wait for long beeps and short beeps. Press 3 times in 3 seconds, and the lock
programming code will be reset to preset.
Low battery warning: beeps and LED flashes red for 5 seconds. Please replace with good quality alkaline batteries
Valid programming: 1 long beep and LED flashes green.
Invalid programming: 2 long beeps and LED flashes red.
Lock error: 3 long beeps and LED flashes red.
Warning sounds and LED flashes red after 4 incorrect code attempts; keypad shuts down for 30 seconds
046-2667-4
046-2668-2
