A
PPENDIX
A -
Port Functions
Protocol Monitoring
DS2000-TS Administrator’s Guide
A - 20
Figure A-15. Port Monitor Menu
Table A-9. Port Monitor Parameters
Parameter
Definition
Default
Range
Display
Indicates the type of display desired.
Link/All
Link/All
Packet
IP
IP-FULL
TCP
Format
Indicates how the data will be displayed.
Hex
Hex
ASCII
Number of lines
Sets the maximum number of lines to display.
5
0 (unlimited)
1-10
Time stamps
Indicates whether or not to use timestamps and, if
used, the type to use.
None
None
Relative
Differential
Frame Numbering
For X.25 only, indicates whether to use frame
numbering
N
N/Y
Packet Types
Indicates the type of packets to display.
Data Only
All Frames
Data Only
Control
Start Channel/
End Channel
Indicates the range of data to display (specified by
the DLCI or LCN).
N/A
DLCI or LCN
number
Filter on
Specifies the type of traffic, if any, on which to filter.
Both
Both
None
Transmitted
Received
*** Port Monitor CON ***
Display Packet
Format Hex
Number of lines 5 (0 = unlimited, 1-10)
Time Stamps None
Frame Numbering N
Filter on None
Mac Address (Ctrl-D to clear)
IP Address 0.0.0.0 (Ctrl-D to clear)
TCP Socket 0 (0-65535)
_________[DynaStar_6b2c]__________ Process selections (Y/N): Y
<RET> to toggle or type value Press ESC to return to previous menu
Cursor up/down for more entries Use <CTRL-D> to delete entry
