A
PPENDIX
A -
Port Functions
Configuration
DS2000-TS Administrator’s Guide
A - 5
A.2
C
ONFIGURATION
Selecting
<1> Configuration
from the Functions for Port n menu allows the user to configure the protocol,
connection mode, line speed and addresses for the Ethernet, Serial, and Console ports.
A.2.1 Ethernet Port Configuration
Selecting Configuration for the Ethernet port leads to a set of screens that configure the on-board Ethernet
port. From the Port menu, type
<E0>
and press
<Enter>
. From the Functions for Port E0 menu select
<1>
Configuration
and press
<Enter>
. The default parameter settings for the port are shown in
Figure A-5
. The
only configurable parameters are Port Name, IP Routing and LAN Speed.
Table A-2
describes the
parameters and options.
Figure A-5. Ethernet Switch Port Configuration Menu
*** Ethernet Interface Parameters ***
Port: E0 On-board Ethernet
Port Name: Ethernet (14)
MAC Address: MAC address: 00200ab06b2c
IP routing: Y
LAN Speed: Auto Negotiate
_________[DynaStar_6b2c]__________ Process selections (Y/N): Y
Use <TAB> and CURSOR to move fields Press ESC to return to previous menu
Use <CTRL-D> to delete entry
