GARO ENTITY PRO Installation And Operation Manual Download

Page: 21 / 102

K. Use the GARO Connect app to generate the

installation code. The owner normally provides

the installation code to the installer. However,

the first installation can be made by the installer

and handed over to the owner.

L. Prepare the Wi-Fi credentials (SSID and

password), if Wi-Fi is used for internet

connection. The owner of the local Wi-Fi then

needs to provide the Wi-Fi credentials to the

installer.

M. Order the required products, accessories and

other material.

N. Unpack the packages from GARO. Inspect the

product(s) and accessories while unpacking to

make sure that no damage has occurred during

transport. Also, make sure that all the necessary

product(s) and accessories are available, before

the installation is started.

O. Start the physical installation.

4.5

TO GENERATE THE INSTALLATION CODE

An installation code is used as a key to the location. It is

created and used in the GARO Connect app. An

installation code must be provided to the installer for

correct installation of the charging station. The

installation code is owned and generated by the owner.

An installation code provides access to a location.

NOTE

A new installation can also be started by the installer

that acts as an intermediate owner, which means that

the installer hands over the ownership after installation

is completed.

NOTE

If the installer no longer shall have access to the

location, generate a new installation code.

NOTE

There can only be one installation code for each

location. However, an installation code can be used by

several installers but only 1 installer shall be formally

responsible for the installation work. Refer to

To prepare

the installation (owner), page 61

4.6

TO DO A CHECK OF THE DELIVERY

•

Make sure that the delivery is complete and correct.

A. Installation bracket

B. Charging unit

C. Front cover

D. Bag with 2 keys, 2 types of cable grommet, 4 screw

covers and 2 stickers (for the IT 230 V system)

4.7

TO ENSURE THE NECESSARY TOOLS

•

Make sure that the necessary tools for the

installation are available.

Version: 1.3

Installation

Summary of Contents for ENTITY PRO







































































































Search results

Summary of Contents for ENTITY PRO

Reviews:

Related manuals for ENTITY PRO

Brands by name

Popular brands

GARO ENTITY PRO, Installation And Operation Manual

Search results

Summary of Contents for ENTITY PRO

Reviews:

Related manuals for ENTITY PRO

Brands by name

Popular brands