Navigation settings
Select Settings > Navigation.
Calculation Mode: sets the route calculation method.
Off-Route Recalculation: sets recalculation preferences when navigating away from an active route.
Avoidances: sets road features to avoid on a route.
Custom Avoidances: allows you to avoid specific roads or areas.
Toll Roads: sets preferences for avoiding toll roads.
Tolls and Fees: sets preferences for avoiding toll roads and toll stickers.
NOTE: this feature is not available in all areas.
Environmental Zones: sets the avoidance preferences for areas with environmental or emissions restrictions
that may apply to your vehicle.
Restricted Mode: disables all functions that require significant operator attention.
GPS Simulator: stops the device from receiving a GPS signal and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle acceleration data for a given route.
Faster Time: calculates routes that are faster to drive but can be longer in distance.
Shorter Distance: calculates routes that are shorter in distance but can take more time to drive.
Off Road: calculates a direct line from your location to your destination.
Setting a simulated location
If you are indoors or not receiving satellite signals, you can use the GPS simulator to plan routes from a
simulated location.
1 Select Settings > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the screen.
4 Select the location description.
5 Select Set Location.
Bluetooth settings
Select Settings > Wireless Networks.
Bluetooth: enables Bluetooth wireless technology.
Search for Devices: searches for nearby Bluetooth devices.
Friendly Name: allows you to enter a friendly name that identifies your device on other devices with Bluetooth
wireless technology.
Wi
‑
Fi settings
The wireless network settings allow you to manage Wi‑Fi networks.
Select Settings > Wireless Networks.
Wi-Fi: enables the Wi‑Fi radio.
Saved Networks: allows you to edit or remove saved networks.
Search for Networks: searches for nearby Wi‑Fi networks (
Connecting to a Wi‑Fi Network, page 53
).
zūmo settings
49
