Radio
NOTE: this feature is not available on all product models.
You can use the radio app to create radio presets, select a radio channel and select squelch codes. To use this
feature, you must connect the device and the antenna to the Group Ride mount. The zūmo device configures
radio settings automatically when you join or create a group ride.
Selecting a Preset
NOTE: for some product models, the Radio app is located in the apps menu.
1 From the main menu, select Radio.
2 Select an option:
• To move through available presets, select or
.
• To select a preset from the menu, select Preset.
Selecting a Radio Channel
1 From the main menu, select Radio.
2 Select an option:
• To move to a different channel, select
or
.
• To select a MURS channel from the menu, select Channel.
Adjusting the Squelch
You can adjust the squelch and change between CTCSS, DCS and Open squelch modes to improve audio
quality and avoid radio interference in your area.
1 From the main menu, select Radio.
2 Select an option:
• To choose a squelch code within the current mode, select
or
.
• To adjust the squelch mode, select Open.
Adding a Custom Radio Preset
1 Select Radio > Preset >
.
2 Select
or
to select a channel and squelch code.
3 Select Save.
Selecting a Roger Tone
You can select the tone other devices play when you operate your radio.
1 Select Radio >
> Roger Tone.
2 Select a roger tone.
The device plays the selected tone.
3 Select Save.
Turning the Radio Off
Select Radio > > Continue.
Using the apps
41
