5
zūmo 500/550 Owner’s Manual
a
PPendiX
Charging the zūmo
1. Connect the power cable to a mount
and a power source.
2. Place the zūmo in the mount, and flip
the lever down.
OR
1. Charge the zūmo with the AC power
cable. Plug the small end of the AC
power cable into the mini-USB port
on the bottom of the zūmo.
2. Plug the other end into a standard
wall outlet.
Resetting the zūmo
If your unit freezes up, press and hold
and press
.
Calibrating the Screen
If the touch screen is not responding
properly, calibrate the touch screen.
Turn the unit off. Press and hold
for
about one minute until the calibration
screen appears. Follow the on-screen
instructions.
U�pdating the zūmo
pdating the zūmo
Software
1. Go to
WebUpdater program to your
computer.
2. Connect the zūmo to your computer
using the mini-USB cable.
Mn-USB port for AC power, USB Mass
Storage mode, and updatng software
3. Run WebUpdater, and follow the
screen prompts. After confirming
that you want to perform an update,
WebUpdater automatically downloads
the update and installs it on your
zūmo.
4. Eject and unplug your zūmo (see
).
130.com.ua
Autogood products internet store http://130.com.ua