Garmin VIRB Ultra 30, Quick Start Manual

Page: 38 / 311

VIRB® ULTRA 30 37
EN
Voice Control
The voice control feature allows you to control your
camera by saying words and commands
NOTE : The voice control feature is available only in
English. You can use this feature while the interface
is set to a different language, but you must speak the
commands in English.
Turning Voice Control On or Off
From the main menu, select > Voice Control
Controlling the Camera Using Voice
Commands
1 Say OK , Garmin to activate the voice control feature.
The camera plays a tone and starts listening for a
command.2
2 Say a command:
• To take a photo, say Take a Photo or Take a Picture .
• To start recording video, say Start Recording .
• To stop recording video, say Stop Recording .
NOTE : You can stop recording using a voice com-
mand only if you started recording using a voice
command.
• To place a bookmark in the video while you are
recording, say Remember That.
This option allows you to mark key moments in the
video as they occur so that you can find them easily
while editing the video.
The camera plays a tone when it recognizes your com-
mand
Voice Control Tips
• Speak in a normal voice directed at the device.
• Reduce background noise to increase the accuracy of
the voice recognition.
• Before each command, say OK, Garmin .
• Listen for a tone to confirm when the device success-
fully receives a command.
• Watch the status LEDs to confirm the camera recog-
nized the command. The LEDs flash green twice to
indicate the camera recognized the command. The
LEDs flash red twice to indicate the command was not
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 37 2016/8/9 上午 10:42:03