Garmin VIRB Ultra 30, Quick Start Manual

Page: 18 / 311

VIRB® ULTRA 30 17
EN
Ultra-Zoom (2x) : Captures a very focused view. Use this
option for long-range video and closed or covered
surroundings.
Setting the Video Format
You can set the video standard for your region. The
video standard affects the available video frame rate
options (FPS).
1 From the main menu, select > System > Language
and Region > Format .
2 Select NTSC or PAL .
Pro Settings
From the Video or Photos settings, select Pro Settings ,
and select the toggle switch to enable pro settings.
TIP : While pro settings are enabled, you can swipe left
from the viewfinder to quickly view or change the
current pro settings.
Exposure Bias : Sets the exposure bias. Exposure bias
affects the level of brightness.
ISO Limit: Sets the maximum level of sensitivity
and image noise. The camera automatically uses the
best ISO level for the lighting conditions, up to this
maximum. Higher ISO values have more visible noise
or grain. Higher ISO values are best for use in low
light environments or indoors. Lower ISO values are
best for use in sunlight. You can use the 6400 option
for brighter video in low light, the 1600 option for
moderate brightness in low light, or the 400 option
for darker video in low light.
Color Palette : Sets the color palette. You can use the
Vivid option for a more vibrant color palette, or the
Flat option for a more neutral color palette.
Sharpness : Sets the level of sharpness. You can use
the High option for a sharper look, the Medium
option for moderate sharpness, or the Low option for
a softer look.
High Bitrate : Records video at a higher bitrate for
some video modes. This feature may improve the
quality and smoothness of the video, especially when
recording fast motion or high contrast scenes. En-
abling high bitrate mode may decrease the amount
of recording time available on your memory card.
White Balance : Adjusts the color tone based on your
VIRB ULTRA APAC-八國 [142x86mm]-15.indd 17 2016/8/9 上午 10:42:02