VHF 300 Series Owner’s Manual
3
Advanced Operation
OFF
—the radio will not send data for this vessel. Distress call information will still be
sent.
Modifying the Operating Settings
Modifying the Backlight and Contrast Settings
1. Press the
MENU
key.
2. Select
SYSTEM
>
DISPLAY
>
BACKLIGHT
or
CONTRAST
.
3. Turn the
Channel
knob to adjust the backlight or contrast. “MAX” represents the
maximum setting, and the number 1 represents the minimum setting.
4. Select
CANCEL
to disregard your changes and return to the previous screen. Select
OK
to save your changes and return to the Home screen.
Modifying the Beeper Setting
You can change the volume of the beeper tone that sounds when you press keys or the
Channel
knob, or you can turn the beeper tone off.
1. Press the
MENU
key.
2. Select
SYSTEM
>
BEEPER
.
3. Select from the following options:
OFF
—the radio does not beep when you press keys, or when you press the
Channel
knob.
QUIET
or
LOUD
—set the beeper volume level.
Turning the Auto Power-On Setting On or Off
1. Press the
MENU
key.
2. Select
SYSTEM
>
AUTO POWER-ON
.
3. Select
ON
or
OFF
.
Configuring Whether Latitude and Longitude are Displayed on the
Home Screen
You can display the latitude and longitude on the home screen if you have a GPS device
connected to your radio, or if you enter position data manually.
1. Press the
MENU
key.
2. Select
SYSTEM
>
NUMBERS
>
LAT/LONG
.
3. Select from the following options:
AUTO
—latitude and longitude information is displayed on the Home screen.
HIDE
—latitude and longitude information is not displayed on the Home screen.
•
•
•
•
•
