Garmin VHF 200 Series Owner'S Manual Download Page 19

Page: 19 / 60

VHF 100/200 Series Owner’s Manual

Basic Operation

Automatic Transmitter Identification System (ATIS)

ATIS is a vessel identification system that can be used on certain inland waterways in

certain countries throughout Europe. Your Garmin dealer can program your VHF 100i,

VHF 200i, or GHS 10i to use ATIS if you plan to use your radio on waterways that are

within the bounds of the Regional Arrangement Concerning the Radiotelephone Service

on Inland Waterways (the Basel Agreement). The use of ATIS is prohibited outside the

European inland waterways covered by the Basel Agreement.
When you enable ATIS, a data signal identifying your station is sent at the end of every

transmission. Data identifying your position is not sent; however, your position is calculated

through the method of triangulation by coastal stations receiving your transmissions.
To enable ATIS, enter your ATIS identification number (see below), and then turn on ATIS

(see

page 14

). Contact your Garmin dealer to determine your ATIS identification number

and to learn about ATIS requirements for your region.
Your radio disables the following functions when you enable ATIS:

Digital Selective Calling (DSC)
Dual watch and Tri watch
Channel scanning

The following International channels are restricted to transmit on low-power (1 watt) when

you enable ATIS: 6, 8, 10, 11, 12, 13, 14, 71, 72, 74, and 77.

Entering Your ATIS Identification Number

IMPORTANT:

Use caution when entering your ATIS identification number because you can

only enter it once. If you need to change your ATIS identification number after entering it, you

must take the radio to your Garmin dealer for reprogramming.

1. Press the

MENU

key.

2. Select

ATIS

MY ATIS ID

3. For each number in the sequence, turn the

Channel

knob clockwise to increase the

number, and counterclockwise to decrease the number.

4. Press the

Channel

knob to accept the number and move to the next number in the

sequence.

5. Select

ACCEPT

when you have entered your ATIS number. The radio prompts you

reenter your number.

6. Enter your ATIS ID number again, and press

ACCEPT

. If the ATIS ID numbers you

entered do not match, the screen displays “ATIS ID NUMBERS DO NOT MATCH”.

Select

RETRY

and enter the numbers again.

•
•
•

Summary of Contents for VHF 200 Series





























































Search results

Summary of Contents for VHF 200 Series

Reviews:

Related manuals for VHF 200 Series

Brands by name

Popular brands

Garmin VHF 200 Series, Owner'S Manual

Search results

Summary of Contents for VHF 200 Series

Reviews:

Related manuals for VHF 200 Series

Brands by name

Popular brands